A dishwasher is an essential appliance in many homes, making dishwashing a breeze and saving time on daily chores. However, there comes a time when you need to replace or remove your dishwasher, either due to upgrading to a newer model, remodeling your kitchen, or moving. Removing a dishwasher can be a daunting task, especially if you’ve never done it before. In this blog post, we will guide you through the process of removing a dishwasher step-by-step, providing helpful tips and links to relevant articles online. If you’re located in Scottsdale, AZ, or the entire Phoenix metro, and need help with dishwasher removal or any other junk removal services, M & G Junk Removal Services, LLC, is here to help!
Step 1: Turn Off the Power
Before you start removing the dishwasher, it is crucial to ensure your safety by disconnecting the power. Locate your home’s electrical panel and turn off the circuit breaker that supplies power to the dishwasher. You can usually find this information on the panel’s label. If you’re unsure, it’s better to switch off the main power.
Tip: Use a non-contact voltage tester to confirm that the power is off before proceeding.
Related article: How To Turn Off The Power in Your Home
Step 2: Turn Off the Water Supply
Next, you need to turn off the water supply to the dishwasher. Locate the water supply valve, usually found under the kitchen sink, and turn it clockwise until it’s tight. If you can’t find the valve, you may need to turn off the main water supply to your home.
Related article: How to Turn Off Water to Your House
Step 3: Disconnect the Water Supply Line
Now that the water supply is off, place a towel or small container under the water supply line to catch any remaining water. Use an adjustable wrench to disconnect the water supply line from the dishwasher’s inlet valve.
Step 4: Disconnect the Drain Line
The drain line is typically connected to your sink’s drain pipe or garbage disposal. Use a screwdriver or pliers to loosen the clamp securing the drain line and then remove it. Be prepared for some residual water to spill out.
Step 5: Remove the Dishwasher’s Toe-Kick
The toe-kick is the panel located below the dishwasher door, hiding the electrical and plumbing connections. Use a screwdriver to remove the screws securing the toe-kick, and then remove it to access the connections.
Step 6: Disconnect the Electrical Wiring
With the toe-kick removed, locate the electrical box, usually on the right side of the dishwasher. Remove the cover and use a voltage tester to ensure the power is off. Next, disconnect the wires by unscrewing the wire nuts and separating the wires. If your dishwasher has a power cord, simply unplug it from the wall.
Step 7: Detach the Dishwasher from the Cabinet
Dishwashers are typically secured to the underside of the countertop with mounting brackets. Use a screwdriver to remove the screws attaching the dishwasher to the brackets or the countertop. Some models may also have screws securing the dishwasher to the side of the cabinet.
Step 8: Remove the Dishwasher
With all connections detached, and the dishwasher free from the cabinet, carefully pull the dishwasher out from its space. You might need to adjust the dishwasher’s leveling legs or wheels to clear the flooring. Ask for assistance if the dishwasher is heavy or difficult to maneuver.
Tip: Lay down a piece of cardboard or a moving blanket to protect your floor and make sliding the dishwasher out easier.
Related article: How to Remove A Dishwasher
Step 9: Dispose of the Dishwasher Responsibly
Once the dishwasher is removed, you’ll need to dispose of it responsibly. Many local waste management facilities and recycling centers accept old appliances. Some retailers also offer haul-away services when you purchase a new dishwasher. Additionally, you can donate your old dishwasher to a charity or nonprofit organization if it’s still in good working condition.
Related article: How to Dispose of Old Appliances in Phoenix (Bulk Pickup Day is once/year in most neighborhoods)
Final Thoughts
Removing a dishwasher can be a challenging task, but with the right tools, some patience, and by following the steps outlined in this guide, you can successfully remove your dishwasher. Remember, safety should always come first, so make sure to disconnect the power and water supply before starting the removal process.
If you’re located in Scottsdale, AZ, or the entire Phoenix metro, and need help with dishwasher removal or any other junk removal services, don’t hesitate to reach out to M & G Junk Removal Services, LLC. Our experienced and professional team can take care of the entire removal process, saving you time and effort. Our teams are available 7 days/week 8am to 6pm.
Call to Action: Book your pick-up appointment with M & G Junk Removal Services, LLC today by visiting our website at mgjunkremovalservicesllc.com or calling us at (480) 395-6187. Let us help you with all your junk removal needs!